It’s tough to find space for a remote that looks good and lets the rider maintain full control. Enter TwistLoc: Twist to lock, push the button to unlock. It controls forks, rear shocks, or both simultaneously. With a consistent grip size and light-touch action, TwistLoc maximizes efficiency while keeping your hands safely on the bar. Features - Easy action: Twist to lock, push button to release - Curved "CRVD" and straight "STRT" cable options - Perfect for XC, Trail, and Enduro usage - Fixed grips included
Brooks Slender Leather Grips feature vegetable-tanned leather tape, and are designed to offer an alternative performance option for the user, while maintaining the standard for sustainability set by the Plump Grips, allowing the user to replace worn parts if necessary. The design incorporates an aluminum shell around which the bar tape is wrapped in the manner of traditional handlebar tape. The leather is then held in place by aluminum and steel clamps which can be removed in the event that the tape requires replacement. The tape is made from the same vegetable-tanned leather used for Brooks Saddles and natural cork. Made in Italy.
Bring the stylish comfort of a well-worn baseball glove to your ride with Portland Design Works' ergonomic Whiskey Grips. They're made from classically stitched, vegetable-tanned leather with polished aluminum lockrings for durability and a finish that'll only improve with age.
- Classic leather designs with lock-on convenience - Balmoral model has an ergonomic shape and a stitched leather cover
The GS-grip combined with a compact 2-finger bar end made out of fiberglass reinforced composite, which offers more hand positions for increased comfort on long mountain bike rides. Additional rubber is used on the bar end improving the rider's grip during hand position changes. The exclusive German-produced rubber compound found in the grip and on the bar end enables precise steering and control, all while still maximizing optimized damping features. The grip provides ideal comfort over long distances through ultimate pressure distribution and ride-tuned flex. - Carbon bar compatible - Uses: mountain bike, marathon, XC
Our thickest bar tape is ideal for your next double century, gravel grinder or cyclocross race. Discover why our Pro Tour teams spec this tape for the Spring Classics.
Bring the stylish comfort of a well-worn baseball glove to your ride with Portland Design Works' Bourbon Grips. They're made from classically stitched, vegetable-tanned leather with polished aluminum lockrings for durability and a finish that'll only improve with age. - Durable, high-quality full grain leather - Sturdy machined aluminum alloy lockrings - Fits 22.0-22.2mm handlebars - Weight: 136g (4.8oz) per pair - Length: 130mm (5.1") each - Lifetime PDWarranty
$37.00 - $44.99
Keep your bike looking good with SRAM's DoubleTap Lever Hoods matching your frame. They're made of a soft, grippy rubber and will enhance any bike's appearance. They fit RED 22, Force 22 and RED 10-speed ErgoDynamic shifters.
Balance is the key to optimum performance in a stage race. Experience the perfect blend of grip and comfort that teams AG2R La Mondiale Pro Cycling Team, Lotto Soudal and Movistar Team use to win in the pro peloton.
The 702 Trekking and City Comfort Grip features a well thought-out shape with a large supporting wing and outer elevation for hand protection. The 702 is perfect for a comfortable trekking or city bike. The 702-grip’s extra-large wing supports the wrist. Pressure is comfortably and evenly distributed, thanks to a very large surface area. The raised end of the grip nestles against the side of the hand, while the inside is slightly elevated to match the natural position of the hand. As a result, 702 relieves the ulnar nerve, the median nerve, and the carpal tunnel. The clamp is located on the inner side of the grip. This increases the shock absorption and comfort on the hand’s outer side. It is not compatible with twist grips. Various rubber compounds ensure a perfect grip level and high comfort. We only use the best possible materials to avoid sticky/gummy rubber. - Weight (g) / pair: 306 - Diameter at Smallest Point (mm): 108, 111, 124 - Material: Proprietary Rubber Blend
The 710 Tour and Travel Grip features a well thought-out shape, with the wings pulled down far, making the perfect combination of comfort and driving dynamics. The 710 user is a comfort-oriented mountain biker or a sporty trekking biker. This relief wing, which is located at the very edge and deeply extends downwards, frees up space for securely grasping the grip body in all situations. The raised end of the grip externally nestles against the side of the hand, while the inside is somewhat more elevated. As a result, it specifically relieves the ulnar nerve, the median nerve, and the carpal tunnel. The clamp is located on the inner side of the grip. This increases the shock absorption and comfort on the hand’s outer side. It is not compatible with twist grips. Various rubber compounds ensure a perfect grip level and high comfort. We only use the best possible materials to avoid sticky/gummy rubber. This grip is a bit more difficult to install because the clamping is inside and only on the inner third. Use a bit of brake cleaner to slip the grip onto the handlebar very easily and it tightens up very quickly. - Weight (g) / pair: 238 - Diameter at Smallest Point (mm): 91, 101, 106 - Material: Proprietary Rubber Blend
Realize the epitome of grip and control with our thinnest bar tape. Minimal padding allows for maximum feel and handling while carving the corners of your local criterium.
Whether you ride like a thrasher or just kick it around town, the Speed Metal Grips from Portland Design Works will improve your grip and style. The ergonomic metal thumb grooves are extra comfy and the rubber inserts add just the right amount of cushion and grip.
Bontrager's inForm Satellite Grips boast an ergonomic shape for top comfort and support. They relieve pressure on the ulnar nerves to protect your hands and keep you riding comfortably on even your longest days. They also have Bontrager's Zone Density construction that utilizes soft rubber over the handlebars for padding and a great feel, with a denser compound in the wide areas for support. These great grips also have integrated clamps so they can be locked onto the handlebars so that they won't slip or move.
Piloted to two Marathon World Championship titles and the Leadville 100 course record! The Ergon GS1 for Twist-Shift combines comfort and support in a lightweight package for endurance athletes. The exclusive German-produced rubber compound enables precise steering and control, all the while still maximizing optimized damping features. The grip provides ideal comfort over long distances through ultimate pressure distribution and ride-tuned flex. The package includes an optional adaptor for increased spacing according to the user's preference. This gives the rider a larger gripping position away from the Twist-Shift. Without it, a more compact position. Carbon bar compatible.
The Ergon grip with a 2-finger, mini bar end, delivers more hand positions and improved leverage and stability when climbing or during out-of-the-saddle cycling. The bar end angle can be adjusted independently from the angle of the grip for the perfect personal fit and the bar end doubles as a clamp to lock the grip in place and prevent movement while riding. Like all the grips in the GP Series, the GP2 eliminates numb hands, aching fingers, and tired forearms. The GP2 is made from 100% German, TÜV-certified rubber compounds of the purest quality. - Carbon bar compatible - Uses: mountain biking, touring, commuting - Clamp: fiberglass composite with rubber inserts
The 70X Gravity and E-Performance Grip offers the perfect grip ergonomics for experts. The gravity and downhill grip offers maximum control and grip in rough terrain, even in wet and muddy conditions. The special textured zone of the front and bottom side provides optimal support for the fingers. The exterior side ensures the needed comfort. The clamp is located inside and the clamping sleeve at the (inner) third of the grip. This increases the shock absorption and comfort on the hand’s outer side. Various rubber compounds ensure a perfect grip level and high comfort. We only use the best possible materials to avoid sticky/gummy rubber. The personal grip size is what matters. With the 7OX grip, the sizes differ in diameter and shape. This grip is a bit more difficult to install because the clamping is inside and only on the inner third. Use a bit of brake cleaner to slip the grip onto the handlebar very easily and it tightens up very quickly. - Weight (g) / pair: 132, 155 - Diameter at Smallest Point (mm): 97, 101 - Material: Proprietary Rubber Blend
The 711 MTB Tech and Trail Grip features perfect grip ergonomics for long-distance routes and use in racing on sports-oriented mountain bikes. A well thought-out, highly ergonomic shape offers an especially secure grip and comfort. The outer contact area is less rounded (flattened). The flattened area raises slightly towards the outside for support. Based on the natural contour of the hand on a grip, contact is drawn forward and slightly rearward. The clamp is located inside and the clamping sleeve at the (inner) third of the grip. This increases the shock absorption and comfort on the hand’s outer side. The flat angular bottom offers a perfect form fit. The design organically flows with your palm and fingers providing the ideal interface and optimal cushioning. 711 offers extended pressure distribution and hand support compared to a wing design that supports only the outside of your hand. The grip can be squeezed less tightly because it fits better. Various rubber compounds ensure a perfect grip level and high comfort. We only use the best possible materials to avoid sticky/gummy rubber. The end of the grip is closed, so no plugs are needed. As round as necessary and as flat as possible! This grip is a bit more difficult to install because the clamping is inside and only on the inner third. Use a bit of brake cleaner to slip the grip onto the handlebar very easily and it tightens up very quickly. - Weight (g) / pair: 128, 150, 186 - Diameter at Smallest Point (mm): 91, 101, 106 - Material: Proprietary Rubber Blend
Keep your bike looking good with SRAM's HydroR Lever Hoods. They're made of a soft, grippy rubber and are a great replacement hood for HydroR levers.
Our initial partnership with Aaron Gwin produced numerous innovations that pushed grip technology to new levels. With the new AG2 Grips, we wanted to take things even further. We started with an ultra-soft pro compound and built it into an improved knurl pattern that provides extra tackiness and control along with reduced vibration transfer. We coupled this with our exclusive offset design that offers even more impact dampening where it is needed most, without increasing the grip diameter. We then redesigned the most impact-prone portions of the grips to provide an even better feel and accurate control when riding. - Grips feature a larger diameter than the original grips (30.5mm) with offset padding towards the rider for improved comfort - Soft Pro compound provides excellent shock absorption - Redesigned surface pattern for improved traction and vibration dampening - Redesigned ends provide an improved feel - Provide extra durability against grip blowout - Thin ribs add control without a bulky feel - Uses our race-proven Version 2.1 Lock-On system - Molded over the aluminum endcap, the end provides durability but will not gouge
Ergonomic design and sized for your hands. Go the distance with the XR Endurance Elite mountain bike grip. A contoured shape provides ultimate comfort and support, while an opposing tread pattern ensures your palms are padded and your fingers are locked in, keeping you confident and comfortable no matter how long you're out on the trails. Key features - Contoured design comfortably supports palm to decrease fatigue - Opposing tread design absorbs shock in palms with a biting grip in fingers - Dual-density compound design provides secure grip, control, and comfort - Tread features continuous channels to funnel sweat for effective moisture management - Core-lock clamp eliminates slipping by securing grip core to bar - 3mm M4 bolt increases hold and resists stripping - inForm BioDynamic shape with narrow in-board diameter increases finger wrap
A dual lock-on MTB grip with a unique finned texture that provides a secure, comfortable grip for your hands for added support and control. Take command of your cockpit with a secure, confident grip that conforms to your hands for added comfort and control. The XR Trail Pro features a finned texture that provides a secure yet forgiving feel that oozes confidence and keeps you comfy on even the longest days on the bike. A dual Lock-on keeps things in place and the recycled materials that make up the grips' core breathe a second life into ocean-bound plastics. Product details - Finned texture pattern conforms to your hand for supportive grip - Rubber compound and tread design are optimized for control and comfort - Grip core made with recycled ocean-bound plastic - Dual-clamp with alloy core-lock design offers secure positioning for solid, predictable performance - Available in both standard 130/130 and 90/130 SRAM TwistLoc-compatible designs - 3mm M4 bolt increases hold and resists stripping - 32mm diameter
The original ergonomic grip. The GP1 sets the worldwide standard in ergonomic comfort, materials, and quality. The GP1 eliminates numb hands, aching fingers, and tired forearms. The uniquely shaped grip body is made from 100% German, TÜV-certified rubber compounds of the purest quality – with infused medical-grade white mineral oil for improved flexibility and durability. A forged aluminum clamp allows the grip to be adjusted for perfect fit, can be easily readjusted, and eliminates twisting once installed. - Carbon bar compatible - Uses: mountain biking, touring, commuting - Clamp: 100% recyclable aluminum
The Tinker Juarez Signature Dread Lock Grips offer the padding and control needed for longer rides. Designed for comfort at every turn, the Dread Lock Grips feature ODI's exclusive ultra-soft and lightweight A.I.R.E. compound along with an offset design that provides additional padding for your hands without the feel of a bulky grip. Soft TPE ends provide extra support when railing turns and help to protect your grips from impacts while the V2.1 Single-Clamp Lock-On system ensures that your grips stay put no matter what the conditions. - Offset Grip design provides more padding on the palm side of grip - Contoured surface for improved comfort on longer rides - Soft TPE Ends offer improved comfort and grip protection - Ergonomic finger cutouts provide improved grip in all conditions - Dread Lock textured surface provides improved control with less effort
$29.99 - $34.99
The Elite Flow grips feature an offset design that provides more padding in certain areas to eliminate the need for a thicker grip. - Single clamp design - Half-waffle pattern on the front of the grip provides extra control when you are off the back of the bike - Length: 130mm
ODI’s first generation Lock-On System are standard for mountain bike racers everywhere. ODI has redefined grip performance again. The new Elite Series grips are engineered from end to end to deliver every feature racers demand. - Offset grip design provides padding where it is needed most - Variable knurl pattern provides comfort/traction where you need it most - Version 2.1 Lock-On System - Soft Pro compound for excellent shock absorption - Reinforced soft ends for added durability - Super slim profile
The Elite Pro grips feature an ergonomic design that conforms to a rider's hands without feeling bulky. - Single clamp design - Half-waffle pattern on the front of the grip provides extra control when you are off the back of the bike - Length: 130mm
$28.95 - $34.99
- Grooved channels prevent mud and water buildup - Overmolded flap gives added protection on outside clamp - Unique undercut pads provide slim comfortable feel with maximum grip - Custom flanged design provides hand support with more usable grip surface
Two Southern California originals have teamed up to create a modern-day classic design. Featuring the classic Vans waffle sole pattern and constructed from ODI's proprietary grip compounds for a consistent feel that provides exceptional control in all conditions. Available as part of the patented Lock-On Grip System for guaranteed slip-free performance and simple installation. For MTB, BMX, ATV, and PWC applications. - Iconic Vans Waffle sole pattern utilizing ODI's proprietary grip compounds - Provides exceptional feel and control in all conditions - Aluminum clamps secure the grip on both ends using a hex wrench
Dimples for the palm, waffle for the fingers. The Clutch grip combines traction and comfort. The waffle tread is specifically shaped to the fingers and oriented for traction in varied conditions. The diameter is narrow at 30mm with an extra wide format at 150mm overall. It features our special tacky compound based on 25a durometer. Weighing in at 100g /pair. Chromag grips feature our unique ‘Split-Teardrop’ end clamp which effectively covers the bar end while still utilizing a true pinch-clamp for the best purchase to the bar.
Page 1 of 9 Next page