Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Parts & Accessories

$28.09
- Engineering-grade thermoplastic construction
- SPD-SL compatible interface
- Cleat Type: SPD-SL

$10.99
Protect the soles of your shoes with the Shoe Shields from Crank Brothers. These stainless-steel plates install under your cleats and prevent the pedal from digging in to your carbon-soled shoes.
- Sold in pairs

$39.99
Problem Solvers Deckster pedal adapters. Converts SPD-compatible pedals to platform pedals for casual cruising.
- Works with 2-bolt, SPD-style cleats, such as Time, Shimano, Crank Brothers, Wellgo and others. Not compatible with Speedplay
- Cleats not included
- 85 x 95 x 10mm platform
- Hardware included, cleats not included

$9.99
Polyurethane pads with diamond plate traction pattern allow riders to customize their pedals for a perfect interface with any shoe.
- Kit includes eight 1mm traction pads and eight 2mm traction pads

$40.00
Replace worn-out spindles or customize your stance width, with these kits for iSSi Road pedals.
- Chromoly spindles
- Sealed cartridge bearing and bushing in an alloy cartridge
- Compatible only with iSSi Road pedals
- Installs with iSSi Road spindle tool (TL5499)
- Pedal Spindle: 9/16"
- Spindle Material: Chromoly Steel

$50.00
Replace or overhaul iSSi pedals with Bushing & Bearing Spindles with these handy kits, or customize your stance width with longer spindle options.
Includes:
- iSSi chromoly spindles
- Sealed cartridge outer bearings
- Inner Bushings
- Spindle nuts
- Seals
- iSSi-branded end caps

$119.99
- Custom pedal adaptor set
- Allows foot to be fastened to any pedal front and rear
- Great for lost mobility or handicap applications
- Allows for up to size 13 shoe
- Includes plates, hardware, and front/rear strap system

$23.00
- Works with all RXS and Impact pedals.
- Five degrees of heel float and 2.5mm of lateral float along the pedal axle.
- Compatible with all three-hole road shoes, but the included shim may be required for shoes that have a large curvature in the forefoot area. Full details are included in the easy-to-use instructions.

$20.00
Wellgo Clipless Cleats for SPD Style pedals.
- Four degrees of float
- Includes four cleat mounting bolts, two cleat washers, and two cleats
- 98A cleat is Shimano SH51 compatible
- Not fully compatible with pedal types that use Shimano multi-release cleats
- Packed in bag, not for retail display

$17.10
Wheels Manufacturing Pedal Washers help distribute the forces of a pedal spindle on your expensive crank arms and allow you to torque pedals properly over and over again without damaging crank arms.

$27.00 - $34.99
The KEO GRIP cleats closely resemble the KEO CLEAT model, yet they boast the added feature of a TPU layer on the shoe side which prevents the risk of cleats sliding on carbon soles. Their anti-slip surface on the pedal side offers extra safety and stability when walking.
- Use: Road
- Material: Polyamide + TPU
- Lateral adjustment: 4mm
- Longitudinal adjustment: 9mm
- Weight (pair + fasteners): 68g

$10.00
These 3mm stackers can easily correct the common issue of leg length inequality.
- External cleat lift for addressing leg length inequality.
- Shaped to fit SPD-SL, Look Keo, and Speedplay Zero pedals.
- Includes longer screws.
- Package includes two cleat stackers.

$45.99
The Spoon Pedal Axle Rebuild kit includes the internal parts required to completely rebuild a set of Spoon pedals.
- Pins available separately

$24.99
The MADE by LOOK KEO standard is recognized in the cycling world for its minimal weight and compact design of the cleat and pedal combo. Of course, compatible with all pedals on the market, their memory positioner is a major advantage when changing your cleats. Their principle and use are the same as the DELTA cleat standard; engagement and disengagement remain efficient and reassuring.
- Use: Road
- Material: Polyamide + PTFE
- Lateral adjustment: 4mm
- Longitudinal adjustment: 12mm
- Weight (pair + fasteners): 68g

$19.90
- Set of 44 total replacement steel pins for vault pedals
- Run threads-out for maximum traction or flip the pins to heads-out for less grip
- 16 Short pins (for use in the center) overall length 8.5mm, stud is 4.5mm
- 28 Long pins (for use in the outside edge) overall length 12.5mm, stud is 4.5mm
- Use either a 5mm spanner or the included 2mm hex wrench to secure/remove

$85.00
Traditionally, mountain cleats have only had two material options. Mild steel and brass. This has largely been to ensure that the cleat wore out faster than the pedal interface, but has left us with cleats that are often times very fast wearing, and in all cases, are quite heavy.
Enter 6/4 Titanium, only slightly less hard than tool or spring steel used in the pedals, it's a remarkable 2.25 times stronger and 3 times tougher than brass or mild steel. Best of all, the extreme toughness and abrasion resistance of 6Al/4V titanium means that you can expect 300-400% wear life compared to traditional materials.
Now we couldn't just stop there, but by combining 3D printing technology with this material that is 1/3 lighter than steel, we are able to achieve a cleat with internal lattice structure (called a gyroid) which maintains stiffness and strength while reducing weight to create a cleat set that is HALF the weight of a standard cleat set.
This savings of 25-30 grams per set of cleats is significant over time, particularly in CX events where running is crucial.
25gm reduction x 100 rpm = 180kg of mass not lifted per hour of riding, 90kg per leg!

$12.00
The Keo Spacer adaptors are slim wedges that fit between the shoe and the cleat. They aim to avoid the unpleasant creaking sound provoked by contact between the sole and the cleat, which can arise in particular with flat-soled shoes. Delivered with 2 spacers and 6 screws for quick and easy installation.

$13.59
- Cleat covers to avoid wear and provide stability and grip while walking
- Lightweight, flexible and durable

$20.39
Origin-8's SPD Cleats are compatible with Shimano SPD-style pedals. These cleats are single release.

$17.89
Origin-8's Look Delta Cleats are compatible with Look Delta-style pedals.
- These cleats use the Look/SPD-SL bolt pattern.

$32.29 - $39.99
Keep your feet on the pedals and mash happy. Straps are the perfect intro to foot retention for those that aren't ready to go full-clipless yet. Get more out of your pedal strokes, stay strapped.
These Pure Pro footstraps are made out of ballistic nylon and military-grade parts. The best quality on the market, these straps will assist in your perfect pedal stroke along with helping you skid to a stop in fixed gear. Comes with left and right straps, but pedals aren't included!
Page 1 of 5
Next page