Wheels

- E*thirteen freehub bodies feature 6 degree (60 Point) engagement - Kits include freehub body, bearings, springs, and pawls - SRAM XD-11 Freehub body converts all e*thirteen plus level hubs for use with SRAM XD-11 drivetrains

The Wolf Tooth axle uses a captive steel washer under the head to reduce friction on the fork leg. This protects your expensive fork, transfers more of the tightening torque to clamping load for a stiffer interface and prevents the axle from sticking or galling when you want to remove it. These are also a great replacement option for lost or damaged stock axles. Always apply a small amount of grease to the washer and threads when installing. - Designed and manufactured in Minneapolis, MN USA - 7075 T6 Aluminum - Similar to Fox Kabolt axle

The Wolf Tooth axle uses a captive steel washer under the head to reduce friction on the fork leg. This protects your expensive fork, transfers more of the tightening torque to clamping load for a stiffer interface and prevents the axle from sticking or galling when you want to remove it. These are also a great replacement option for lost or damaged stock axles. Always apply a small amount of grease to the washer and threads when installing. - Designed and manufactured in Minneapolis, MN USA - 7075 T6 Aluminum - Similar to Fox Kabolt axle

The Wolf Tooth axle uses a captive steel washer under the head to reduce friction on the fork leg. This protects your expensive fork, transfers more of the tightening torque to clamping load for a stiffer interface and prevents the axle from sticking or galling when you want to remove it. These are also a great replacement option for lost or damaged stock axles. Always apply a small amount of grease to the washer and threads when installing. - Designed and manufactured in Minneapolis, MN USA - 7075 T6 Aluminum Not compatible with RS-1 fork

No.9 36w rims are our choice for all-around trail riding and off-road touring. They fit a huge range of modern mountain bike tires and offer lightweight performance across the board. Available in both 27.5" and 29" sizes, these highly versatile mountain rims provide huge performance gains over aluminum rims of the same width. A perfect mix of width, weight, and stiffness, these will be right at home on almost any mountain bike in your stable. As with all rims we sell, these come with tubeless valves and tape in the box. - Designed to be used with spoke nipple washers - Recommended weight limit 240lbs

Stainless spoke nipple flat washers from Whisky. - .3mm Thickness

Whisky’s tubeless rim tape is designed to make setup as easy as possible. Elasticity allows for smooth, even adherence while translucency lets you see where the tape contacts the rim. Different widths available to fit almost any rim.

Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. - Fits many Taiwanese hubs with 135mm spacing - Type: Hollow Axle - Threads: 9.5mm x 26tpi - Diameter: 9.5mm - Length: 146mm - 1 axle per bag

Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. - Fits many Taiwanese hubs - Type: Solid Axle - Threads: 9.5mm x 26tpi - Diameter: 9.5mm - Length: 174mm - 1 axle per bag

Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. - Fits many Shimano / Japanese front hubs - Type: Solid Axle - Threads: 9mm x 1 - Diameter: 9mm - Length: 155mm - 1 axle per bag

Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. - Fits many BMX hubs - Type: Solid Axle - Threads: 9.5mm x 26tpi - Diameter: 9.5mm - Length: 187mm - 1 axle per bag

Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. - Fits many BMX hubs - Type: Solid Axle - Threads: 9.5mm x 24tpi - Diameter: 9.5mm - Length: 180mm - 1 axle per bag

Wheels Manufacturing Outer Axle Nuts are high-grade steel nuts that provide secure wheel fixing for solid-axle wheels. - 14mm x 1mm (1411-AN) sold in pairs - All others sold individually

Built for bashing, whether on a gravity shred sled or fully loaded bikepacking rig, WTB's KOM Tough rims are extruded from top-tier alloy to provide utmost durability at a reasonable weight. Their legendary I-Beam construction has evolved to further reinforce the rim with dual support beams that provide increased strength and stiffness for the world’s most aggressive riders. KOM Tough rims are proven on the toughest tracks of the Enduro World Series, depended on for daily trail rides, and trusted while bikepacking in remote regions of the world. Features: - TCS 2.0 creates a more robust, easily installed and dependable tubeless system. - A recessed channel along the center of TCS 2.0 rims allows installation of the all-new Solid Strip, which prevents tubeless tape from sagging at the spoke holes and results in a smooth, consistent interface between the tire and rim. - 4D angled spoke drilling eliminates binding and lateral loading, and disperses tension more evenly over a greater area.

Built for bashing, whether on a gravity shred sled or fully loaded bikepacking rig, WTB's KOM Tough rims are extruded from top-tier alloy to provide utmost durability at a reasonable weight. Their legendary I-Beam construction has evolved to further reinforce the rim with dual support beams that provide increased strength and stiffness for the world's most aggressive riders. KOM Tough rims are proven on the toughest tracks of the Enduro World Series, depended on for daily trail rides, and trusted while bikepacking in remote regions of the world. Features: - TCS 2.0 creates a more robust, easily installed and dependable tubeless system. - A recessed channel along the center of TCS 2.0 rims allows installation of the all-new Solid Strip, which prevents tubeless tape from sagging at the spoke holes and results in a smooth, consistent interface between the tire and rim. - 4D angled spoke drilling eliminates binding and lateral loading, and disperses tension more evenly over a greater area.

WTB's TCS AL valves are aluminum to shed grams, and come in catchy anodized red, black, or blue. A stepped lock nut adds compatibility among various rim drillings, a smooth pump interface makes adding air easy, and a removable core makes setting beads and injecting sealant a cinch. - Presta - 34mm

- Specifically designed for XC and all-mountain use - Shorter and thicker sidewalls for incredible durability even when paired with low pressure, tubeless tires - Bead hook maximizes 30mm internal width for optimum tire performance

Tannus Armour Tubeless inserts are the result of years of top level multi-cell foam manufacturing mixed with extensive professional riding experience. At the heart of Tannus is the patented Aither Technology; a multi-cell foam compound that forms the structure of the Armour. The inserts are designed to displace small impacts while offering a spring-like rebound for a smooth yet playful ride. - 3% Faster than standard tubeless - Flexible sidewall stabilizing "Wings" for smoother ride quality, with 50% more vibration damping - 20mm of rim protection - Not a sealant sponge – keeps sealant where it belongs - Easy Installation (5 Minutes, No tools required) - 150g - About as much as a standard tube (a little lighter)

Tannus Armour Tubeless inserts are the result of years of top level multi-cell foam manufacturing mixed with extensive professional riding experience. At the heart of Tannus is the patented Aither Technology; a multi-cell foam compound that forms the structure of the Armour. The inserts are designed to displace small impacts while offering a spring-like rebound for a smooth yet playful ride. - 3% Faster than standard tubeless - Flexible sidewall stabilizing "Wings" for smoother ride quality, with 50% more vibration damping - 20mm of rim protection - Not a sealant sponge – keeps sealant where it belongs - Easy Installation (5 Minutes, No tools required) - 150g - About as much as a standard tube (a little lighter)

Tannus Armour Tubeless inserts are the result of years of top level multi-cell foam manufacturing mixed with extensive professional riding experience. At the heart of Tannus is the patented Aither Technology; a multi-cell foam compound that forms the structure of the Armour. The inserts are designed to displace small impacts while offering a spring-like rebound for a smooth yet playful ride. - 3% Faster than standard tubeless - Flexible sidewall stabilizing "Wings" for smoother ride quality, with 50% more vibration damping - 20mm of rim protection - Not a sealant sponge – keeps sealant where it belongs - Easy Installation (5 Minutes, No tools required) - 150g - About as much as a standard tube (a little lighter)

• Replacement aluminum quick release skewers

- Eady to install - Spoke mounted - 2 per set

- Supplies full wheel illumination for 700c/29in wheels and smaller - Approximately 40 hrs of battery life - Water resistant design - Includes 3 (AA) batteries - Sold individually (1 wheel) - Easy to install

Stan's lightweight aluminum valve stems are half the weight of Stan's standard brass valves. The secure round base is compatible with most tubeless rims and a perfect fit for all Stan's BST rims. A removable valve core makes adding sealant easy, and these babies fit up to 8mm valve hole. Sold as a pair.

- Low-profile 30mm internal width optimizes tire shape, traction, and control for 2.3-2.6'' tires - Durable 6069 aluminum with welded joint and reinforced spoke bed - BST Asymmetric design combines Stan's legendary easy tubeless inflation with a stronger, more balanced wheel build - Reinforced spoke bed, combined with the offset drilling of the asymmetrical design, builds into an incredibly durable wheel that brings added confidence to every ride. Specs: - Rim Material: Aluminum - Rim Eyelets: No - Valve: Presta - Rim Construction: Double wall - Brake Type: Disc - Tire Type: Tubeless Ready

Stan's No Tubes' Presta Removable Valve Core is a replacement valve core for Stan's No Tubes Presta valve stems and Presta valve equipped rim strips.

Can be used with Stan's ZTR rims to make them airtight or used as a lightweight rim tape in any rim. A single 10-yard roll will tape five 26-inch rims or four 29-inch rims or two wide road clincher rims. 21mm width fits: - ZTR Olympic - ZTR Iron Cross - ZTR 355 - ZTR Alpine - ZTR Crest - ZTR Alpha 340 (2 layers) - ZTR Alpha 400 (2 layers) - Most road clincher rims 25mm width fits: - ZTR 355 (26", 650b, 29") - ZTR Crest - Crest MK3 - ZTR Arch EX - ZTR Flow EX - Crest S1 27mm width fits: - ZTR Flow EX - ZTR Bravo - ZTR Hugo 52mm - Arch S1 - ZTR Rapid 28 - ZTR Rapid 30 - Arch MK3 30mm width fits: - ZTR Flow MK3

Use Stan's Tubeless Valve Stems when you're converting standard rims to tubeless via the taping method. These also have a removable core for easier application of tire sealant. Note: Schrader valve is for non-stepped Hugo rims. If your Hugo rim decal reads: - MAX RIM PRESSURE: 2.8 tires: 26psi, 3.0 tires: 24psi - ERD 615, 622x49.9, 29 in x 52.3mm Your rim has a stepped valve and is not compatible with this Schrader valve.

Compatible with straight valve hole Hugo 52 rims and designed to fit 7.5 - 8.5mm valve holes. Sold as a pair. Identifying your Hugo rim and selecting the correct valve stem: Stepped Hugo rims have a larger diameter valve hole on the interior of the rim, and a narrower hole on outside of the rim. Quick tip: don't remove your tire if you don't have to. If your Hugo rim decal reads: MAX RIM PRESSURE: 2.8 tires: 26psi, 3.0 tires: 24psi ERD 615, 622x49.9, 29 in x 52.3mm Your rim has a stepped valve and is not compatible with this valve. For "Stepped" valve hole Hugo use part AS0105 - Valve Stem pair, Schrader, 32mm, 14mm base.

Sta Tru Rear Wheel - 104mm spacing - Includes 18 tooth rear cog - Single Wall rim - Hub/Brake Compatibility: Coaster Brake - Wheel Size: 12-inch - Cassette Body Type: 3 Prong Cog - ISO Diameter: 203 / 12.5-inch - Rim Width (Internal): 24 mm - Tire Type: Clincher - Rear Axle: 5/16-inch x 104mm

Sta Tru Front Wheel - Hub/Brake Compatibility: Rim Brake - Wheel Size: 16-inch - ISO Diameter: 305 / 16-inch - Front Axle: 3/8-inch x 100mm - Tire Type: Clincher

Sta Tru Rear Wheel - Hub/Brake Compatibility: Coaster Brake - Wheel Size: 16-inch - Cassette Body Type: Threaded Standard 1.37-inch x 24tpi - ISO Diameter: 305 / 16-inch - Valve: Schrader - Tire Type: Clincher - Rear Axle: 3/8-inch Threaded x 110mm

Sta-Tru Double Wall Rear Wheels. - Wheel Size: 20-inch - ISO Diameter: 406 / 20-inch BMX - Valve: Schrader - Tire Type: Clincher

Sta Tru Rear Wheels - Single Wall rim - Wheel Size: 20-inch - ISO Diameter: 406 / 20-inch BMX - Valve: Schrader - Tire Type: Clincher

Sta Tru Rear Wheels - Single Wall rim - Hub/Brake Compatibility: Rim Brake - Wheel Size: 24-inch - Cassette Body Type: Threaded Standard 1.37-inch x 24tpi - ISO Diameter: 507 / 24-inch BMX - Tire Type: Clincher - Rear Axle: 3/8-inch Threaded x 135mm

- Taiwan cruiser steel rims are 39mm wide, w/ 36 holes, 12G CP - Cruiser wheels use C/N 12G UCP heavy duty spokes w/ 5/8" brass nipples - Bolt on wheel

- Taiwan cruiser steel rims are 39mm wide, w/ 36 holes, 12G CP - Cruiser wheels use C/N 12G UCP heavy duty spokes w/ 5/8" brass nipples - Bolt on wheel

- STW ST1 26.5mm wide alloy rims - KT QR ATB 9mm/100/108 axle - Black or Silver UCP spokes

Sta-Tru Double Wall Rear Wheels. - Hub/Brake Compatibility: Rim Brake - Wheel Size: 27.5" - Cassette Body Type: Shimano/SRAM 8, 9, 10 Speed - ISO Diameter: 584 / 650b / 27.5" - Valve: Schrader - Tire Type: Clincher - Rear Axle: QR x 135mm

Sta Tru Rear Wheels - Single Wall rim - Hub/Brake Compatibility: Rim Brake - Wheel Size: 27.5" - Cassette Body Type: Shimano/SRAM 8, 9, 10 Speed - ISO Diameter: 584 / 650b / 27.5" - Tire Type: Clincher - Rear Axle: QR x 135mm

Sta Tru Rear Wheels - Single Wall rim - Hub/Brake Compatibility: Rim Brake - Wheel Size: 650b - Cassette Body Type: Threaded Standard 1.37" x 24tpi - ISO Diameter: 584 / 650b / 27.5" - Tire Type: Clincher - Rear Axle: QR x 135mm

Sta Tru Front Wheel - Single Wall rim - Hub/Brake Compatibility: Rim Brake - Wheel Size: 700c - ISO Diameter: 622 / road / 29" - Front Axle: QR x 100mm - Tire Type: Clincher

Sta-Tru Wheels TR21V tubeless-ready double-wall rims - Hybrid rim with an attractive rim profile developed for Sta-TruWheels, Inc - KT ATB 9mm/100/108 axle hub - Silver UCP spokes

Double wall 32 hole alloy rims - CNC machined sides and single stainless eyelets - KT alloy black MTB style hub - Stainless steel spokes

Double wall rim with CNC side wall - 32h KT Alloy ATB hub - Stainless steel spokes - Black

Sun Duroc 30 Disc blk 32h - -01: STW Turbo 6-Bolt disc - -02: STW Turbo Shimano 6-Bolt disc - -03: STW Turbo Boost 6-Bolt disc - -04: STW Turbo Boost Shimano 6-Bolt disc

The trails in our neck of the woods get pretty hairy pretty fast, so we've found them to be the perfect testing ground for tough, nimble wheels like our Traverse 27.5 Carbon. The steep climbs and descents helped inspire some pretty radical designs, and most importantly, left us with no doubt that these wheels will exceed your expectations. Let's talk about those expectations. They include everything from the ability to stay true after launching off drops to being light enough to efficiently pedal to the top of a climb—and they all begin with the rim. Our engineers knew they wanted carbon fiber, and with the inclusion of our Zero Bead Hook design, they were able to implement a continuous fiber layup across the sidewall and rim bed. And when paired with a whopping 30-millimeter internal rim width, they made a wheel that's super resilient to impact with low rolling resistance and incredible traction. You'll also find that it helps prevent "burping" during hard cornering, while making tubeless set up quick and easy. Along with light overall weight, stiffness, and durability, another top priority for the Traverse was ease of use. First off, we got rid of the creaky straight-pull spokes and corrosion-prone alloy nipples. Next up, we landed on 28 J-bend spokes, for front and rear wheels, that are all the same length—making it easy to find replacements if needed. And finally, we engineered a new hub design with a wider profile and higher flange to aid in overall stiffness. A wider rim does a variety of things for ride performance—it better supports the tire for increased confidence and grip, and it affords you the ability to run lower pressures that help spread impact out over a larger surface area to reduce the risk of damage. And when you combine this girth with the notoriously nimble and playful 27.5 platform, you’re left with an incredibly stiff, quick-to-accelerate wheelset that climbs just as well as it shreds descents. After designing the perfect trail rim, we kept our lightweight and durable design properties in mind with the wheel build, hand-lacing the rims DT Swiss 350 Classic hubs via 28 DT Swiss Competition Race spokes and brass Pro Lock nipples. Inside, you'll find sealed cartridge bearings and a 36t quick engagement ratchet system for quick accelerations. We also wanted to ensure that each wheel was built correctly, and we found that this could only be achieved by hand. Machines, we found, have a tendency to miss little mistakes that humans catch. Each wheelset comes packaged with a SRAM XD driver, 11-speed freehub, and a tubeless valve stem in order to make tubeless set-up a touch easier. *Please note that Shimano freehubs are sold separately. - Rim Type: Traverse Carbon, 27.5, Disc Brake, Tubeless Ready, Zero Bead Hook design - Rim Details: 30mm Internal Width - Hub: DT Swiss 350 J-bend, 6-bolt, 36T (10deg) Star Ratchet, XD Freehub, 110x15mm & 148x12mm thru-axle compatible, (Convertible freehub and endcaps) - Bearing Type: DT Swiss Sealed Steel Cartridge - Nipple: DT Swiss Brass Pro Lock hexagonal - Weight: Wheelset 1700g - Assembly Method: Hand built at every step.

650b bikes are all about fun and nimble handling, and the Specialized Stout XC 650b wheels delivers on this in spades—no matter if you're just getting started or you're a seasoned trail rider. It's been built tough to meet the rigors of mountain biking head-on, while the nimble wheel size guarantees a good time. It features a durable, double-wall alloy rim construction that adds strength without stacking on the weight. And to ensure that you'll be able to stop once you get motoring, the wheels are both disc-compatible. High value just met high performance. - Disc-compatible hubs can also be used with traditional rim brakes. - Double-wall rims are strong and durable. - Machined braking surface creates superior stopping power in any condition. - Stainless spokes won't rust, easing long-term maintenance.

650b bikes are all about fun and nimble handling, and the Specialized Stout XC 650b wheels delivers on this in spades—no matter if you're just getting started or you're a seasoned trail rider. It's been built tough to meet the rigors of mountain biking head-on, while the nimble wheel size guarantees a good time. It features a durable, double-wall alloy rim construction that adds strength without stacking on the weight. And to ensure that you'll be able to stop once you get motoring, the wheels are both disc-compatible. High value just met high performance. - Disc-compatible hubs can also be used with traditional rim brakes. - Double-wall rims are strong and durable. - Machined braking surface creates superior stopping power in any condition. - Stainless spokes won't rust, easing long-term maintenance.

The new Stout XC SL 29 front wheel includes a strong, double-wall alloy rim, stainless steel spokes, brass nipples, and a reliable Shimano Center Lock hub. Charcoal decals complete the look, making this a perfect OE replacement or XC-ready upgrade. - Lightweight and reliable Shimano hub. - Double-wall, disc-specific rim is strong and durable. - Brass nipples hold spoke tension securely and resist rust for added durability. - Stainless spokes won't rust, easing long-term maintenance.

Hand-built to A-Class specifications, the 350 wheels with SPANK Hex Drive hub is the premium lightweight performance offering from the SPANK wheelhouse and is trusted by pros on the Enduro World Series circuit. - Unique profile with low sectional height & wide width adds radial compliance & lateral stiffness - Improved radial compliance for better traction over bumps & chatter while reducing negative feedback to the rider gives enhanced performance & comfort - 30mm internal width is versatile, fitting tires from 2" to 2.6" and allows plus-size tire use without negative squaring off of tire profiles

Hub Adapters for all Oozy hubs and 2016 Spike hubs.

With simple setup and reliable trail performance, the Shimano Deore XT 8100 front hub is perfect for custom MTB wheel builds. - Easy disc brake rotor installation with Center Lock spline mount and lock ring - Tool-less 15mm thru axle system optimizes rigidity and weight - Simple setup and reliable trail performance

Switching to tubeless or in need of valve replacements? Serfas Tire RX replacement valves will do the trick. Available sizes of 32mm, 44mm, or 60mm valves with removable cores, extra valve core, and Schrader to Presta adapter with core removal tool. Please note, Due to the multi-step chemical process and variables involved in anodizing, colors may vary slightly between batches produced.

EWS TESTED. The EWS is strict—break certain parts and you DNF. The rule's meant to encourage sensible management of equipment, but it's also tipped the balance in favor of toughness and reliability. Enter the Reserve 30. Its 30mm internal width supports a 2.3-2.5" tire, and the thick rim beads stand up to the abuse of tough, rocky, steep tracks ridden at elite speed. While DH rims see greater single impacts, nothing beats the full weekend of regular abuse that an EWS race dishes out, to say nothing of the infamous 'Anti-Grip' and the rocks buried within the moondust in the Andes of Chile.

The Deadbolt Ultralight Thru-Axles are offered in a 6mm flat button-head design, for a flush, clean look. Lightweight, easy to use, and secure. - CNC-machined from 7000 series aluminum - One-piece design - Designed to fit all current Salsa thru-axle frames - For other frames, check with the manufacturer for compatibility and other specifications - 6mm hex wrench required for installation

- Original equipment freehub bodies to fit SRAM hubs and wheels. - Includes Drive Side Axle End Cap

Conquer mountains, flatten hills, and feel your bike come alive with this ultra-light, 1365 gram wheelset. Mass is the enemy of performance, and the Alpinist CL is the lightest wheelset in its class. Weight has been pared to the absolute minimum to make the make the most of every watt and deliver incredible responsiveness without sacrificing any of the strength, ride quality, or durability that are crucial to long-term performance and satisfaction. - Assembly Method: Hand-built - Braking Surface: Disc brake only - Extras: Roval padded wheelbag. NoFault crash replacement policy. Lifetime warranty - Front Hub: Roval AeroFlange Disc, Center Lock, Sealed Cartridge bearings - Nipple Type: DT Swiss Pro Lock hexagonal - Rim Depth: 33mm - Rim Material: Carbon - Rim Type: Carbon, clincher (tube-type) - Rim Width: 21mm internal - Spoke Count: 21 - Spoke Pattern: Radial/Two-cross (2:1) - Spoke Type: DT Swiss Aerolite T-head - Weight: 562g

Conquer mountains, flatten hills, and feel your bike come alive with this ultra-light, 1365 gram wheelset. Mass is the enemy of performance, and the Alpinist CL is the lightest wheelset in its class. Weight has been pared to the absolute minimum to make the make the most of every watt and deliver incredible responsiveness without sacrificing any of the strength, ride quality, or durability that are crucial to long-term performance and satisfaction. - Assembly Method: Hand-built - Braking Surface: Disc brake only - Extras: Roval padded wheelbag. NoFault crash replacement policy. Lifetime warranty. - Nipple Type: DT Swiss Pro Lock hexagonal - Rear Hub: Roval AeroFlange Disc, Center Lock, Sealed Cartridge bearings, DT Swiss EXP internals, HG Freehub, 142x12mm thru-axle compatible - Rim Depth: 33mm - Rim Material: Carbon - Rim Type: Carbon, clincher (tube-type) - Rim Width: 21mm internal - Spoke Count: 24 - Spoke Pattern: One-cross/Two-cross (2:1) - Spoke Type: DT Swiss Aerolite T-head - Weight: 686g

Roval's Hardrock 29 Front Wheel is a great replacement hoop, spare wheel, or a great way to update an older mountain bike. This durable, alloy front wheel has a disc-compatible hub as well as a machined rim braking surface on the double-wall rim so it's ready for almost any mountain bike, no matter your brake setup. Non-rusting, stainless-steel spokes round out this high-quality, high-value wheel.