Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Model Years
- Show Fewer Model Years
Hubs
$56.99 - $75.99
Shimano XT FH-M8010/M8000 Rear Hubs.
- Double contact bearing seals
- Super polished bearing races for low friction rolling
- Shimano Quick-engagement freehub
- Not compatible with Shimano 11-Speed Road cassettes
- Cone bearings races ground by a Cubic Boron Nitride tool for smooth-rolling durability
- Center Lock disc brakes provide reliable braking power (lockring sold separately)
$57.99
With simple setup and reliable trail performance, the Shimano Deore XT 8100 front hub is perfect for custom MTB wheel builds.
- Easy disc brake rotor installation with Center Lock spline mount and lock ring
- Tool-less 15mm thru axle system optimizes rigidity and weight
- Simple setup and reliable trail performance
$33.99
The Shimano HB-RS470 front disc brake hub features a Center Lock design, Internal Grease Sleeve, and Cup and Cone Bearing technology.
- The Center Lock system makes for easy rotor installation with a quick and secure spline mount and lock ring
- Hub features internal o-rings and a grease sleeve that helps maintain grease levels and increases service life
$174.99
The DH-UR700-3D Dynamo hub employs a new internal unit construction that is lighter and also reduces dynamo drag while producing 3 watts. It is designed for 26 to 28-inch quick-release wheels.
- New internal unit construction is 28g lighter than DH-T8000-3D
- More efficient wheel rotation reduces dynamo drag by up to 44% from DH-T8000
- Angular contact bearings
- Compact & lightweight
- Low rotational resistance
- Durable sealing performance
$45.99
With simple setup and reliable trail performance, the SLX front hub is perfect for custom MTB wheel builds.
- Easy disc brake rotor installation with Center Lock spline mount and lock ring
- Tool-free 15mm thru axle system is stiff and lightweight
- Simple setup and reliable trail performance
$174.99
From World Cup DH runs to big hits on your local trails, Shimano's Saint rear hub is the answer. Its overbuilt features, like a 12mm thru-axle, beefy flanges, and impact-resistant angular contact bearings, give you the confidence you need to go big and stick the landing. The freehub uses micro-ratchet construction for fast engagement so you can sprint out of the corners and pick up speed for that next double. It's compatible with 8-,9-, and 10-speed drivetrains and uses Shimano's Centerlock Rotor Mount to keep rotor swaps easy.
$179.99
Built with labyrinth and contact seals to remain silky smooth in dusty, muddy, wet, and sandy conditions, and with highly refined cup and cone surfaces, the XTR front hub is perfect for custom MTB wheel builds.
- Traditional flange
$30.00
SRAM's 506 hub borrows technology from its more expensive brethren to bring you a solid hub at a great price. An aluminum hubshell with hi/lo flanges provide no-nonsense durability and even spoke tension. Dependable cup and cone bearings with polished races roll smooth for the long haul and a strong, steel quick-release axle holds up under pressure.
$90.00
Whether the goal is a finish line, epic adventure or simply getting back home again, SRAM's 900 hubs are ready for the challenge. On the inside, their smooth and durable DOUBLE TIME drive mechanism ensures rapid engagement for quick and confident pedal responsiveness. SPEEDBALL bearings provide smooth, long-lasting rotation performance. Multiple spoke-count and cassette-capability options, as well as interchangeable end caps, make the 900 hubs a perfect choice for any disc-equipped road, gravel, cyclocross, cross country, trail, or enduro bike.
- Fully convertible with tool-free end caps
- 24, 28 or 32 spoke holes
$225.00
Whether the goal is a finish line, epic adventure or simply getting back home again, SRAM'S 900 hubs are ready for the challenge. On the inside, the smooth and durable DOUBLE TIME drive mechanism ensures rapid engagement for quick and confident pedal responsiveness. SPEEDBALL bearings provide smooth, long-lasting rotation performance. Multiple spoke-count and cassette-capability options, as well as interchangeable end caps, make the 900 hubs a perfect choice for any disc-equipped road, gravel, cyclocross, cross country, trail, or enduro bike.
- Versatile driver body can accept ROAD or MTB drivetrain, full spline or XD cassettes
- Fully convertible with tool-free end caps
- BOOST variants
- 24, 28 or 32 spoke holes
$225.00
Whether the goal is a finish line, epic adventure or simply getting back home again, our new 900 hubs are ready for the challenge. On the inside, our smooth and durable DOUBLE TIME drive mechanism ensures rapid lightning-fast engagement for quick and confident pedal responsiveness. SPEEDBALL bearings provide smooth, long-lasting rotation performance. Multiple spoke-count and cassette-capability options, as well as interchangeable end caps make the 900 hubs a perfect choice for any disc-equipped road, gravel, cyclocross, cross country, trail, or enduro bike.
- Includes Quick Release & 12x142mm Through AxleCaps
- Fully convertible with tool free end caps
- DOUBLE TIME mechanism offers smooth,quick and durable engagement
- Versatile driver body can accept ROAD or MTB drivetrain, full spline or XD cassettes
- Axle type: Conversion Caps included
- Spoke holes: 24
- Brake compatibility: Disc (6-bolt)
- Driver Mechanism: Double Time - Four Pawl
- Axle material: Tapered aluminum
- Driver body material: Aluminum
- Hub shell: Aluminum - Seeker angled flanges - Oversized body
$89.99
- eMTB rated with steel axles
- 6902 cartridge bearings and robust 10 degree engagement
- 32h spoke count
- For J-Bend spokes only
$214.99 - $219.99
- Tough on trail and light on price rated for everything from XC to Enduro and E-bike
- Steel axles cartridge bearings robust alloy hub shell and steel cassette body
- 10-degree pawl engagement
- International Standard 6-bolt disc mount
- *Shimano/SRAM
$379.99
At the Center of It All
Cast your eyes upon your new favorite component, the infinitely adaptable, fully tuned-and-dialed hub of choice for your custom wheel build. The Vault has almost instant power transfer for slippery-fast speed by way of solid, smart design.
Power To The Pedal
Let's add it up: a 60-tooth drive ring, 6 pawls, acting in 2 groups of 3, for 120 points of engagement. The result– almost instant transfer of power.
Overbuilt But Not Overkill
With this hub, bigger is better. An oversized hub shell ads stiffness and stability while large and in-charge 6902 bearings perform for the long run.
$192.50
Paul Components WORD single-speed rear hubs are classic, reliable hubs with knurled end caps and Enduro cartridge bearings.
- Extra-wide flanges and bearing spaces
- Rear hub accepts BMX freewheels with English threads (1.37 x 24 tpi)
- Please note that radial lacing voids the manufacturer's warranty
- 7075 aluminum axle tube
- Adjustable bearing preload
$192.50
When we first introduced our Wacky One-Speed Rear Device (W.O.R.D.), it was the first purpose-built single speed mountain bike hub. That original hub not only set design standards that continue to this day, like a 52mm single speed chainline, it also proved that small American manufacturers could stand out in a market increasingly crowded by bigger overseas brands.
When designing this modern version of the WORD, we spread the flanges out as far as possible while leaving room for freewheel threading. This allows the WORD to be built up as a strong dishless wheel. Over the years we’ve also improved upon the original axle and bearing adjustment mechanism to produce a single speed hub that we’re proud to call one of our heritage
- 6061 Aluminum
- 200g
- Anodized or Polished
- Black or Silver
- Axle Spacing: 135mm
- Flange Diameter: 43m
- Center to Flange: 39.5mm
- Chainline: 52mm
- Spoke Holes 28, 32, or 36
- Freewheel threading English 1.37x24tpi
- Axle Bolt Torque 21 N·m
$194.50
High flanges builds a stiff, strong wheel
- Hubshell is flip-flop version with fixed threading on one side and freewheel threading on the other
- Adjustable precision bearings
- Knurled stainless steel outer locknut faces
- Includes PAUL stainless lockring
- Bolt On axle
- 290g
Dimensions:
Axle Spacing: 120mm
Flange Diameter: 65mm
Center to Flange: 32.5mm
Fixed Chainline: 44mm
Freewheel Chainline: 48mm
$167.49
- Elite Series convertible cyclocross/gravel hubs
- Available in multiple axle configurations
- Straight pull and J-bend spoke options
- 6 bolt disc brake rotor compatible
- Sealed bearings
- Use: Front Hub
- Bearing: Sealed
- Drilling: 28H
- Material: AL6061
- Color: Blk
- Brake Type: 6B
- OLD: 100mm
J-Bend Spoke:
- PCD-L: 58mm
- PCD-R: 45mm
- LTF-L: 27.65mm
- LTF-R: 15.35mm
- CTF-L: 22.35mm
- CTF-R: 34.65mm
Straight Pull Spoke:
- PCD-L: 51mm
- PCD-R: 51mm
- LTF-L: 31.4mm
- LTF-R: 19.6mm
- CTF-L: 18.6mm
- CTF-R: 30.4mm
$141.09
- Elite Series convertible MTB hubs
- Available in multiple axle configurations
- Straight pull and J-bend spoke options
- 6 bolt disc brake rotor compatible
- Sealed bearings
- Material: AL6061
- Wt: 180g
J-Bend:
- PCD-L: 58mm
- PCD-R: 45mm
- LTF-L: 27.65mm
- LTF-R: 15.35mm
- CTF-L: 22.35mm
- CTF-R: 34.65mm
Straight Pull:
- PCD-L: 51mm
- PCD-R: 51mm
- LTF-L: 31.4mm
- LTF-R: 19.6mm
- CTF-L: 18.6mm
- CTF-R: 30.4mm
$101.99 - $167.49
- Elite Series convertible road disc hubs
- Available in multiple axle configurations
- Straight pull and J-bend spoke options
- 6 bolt and Center Lock disc brake rotor options
- Sealed bearings
- Material: AL6061
Straight Pull Spoke/6-Bolt Disc:
PCD-L: 36mm
PCD-R: 36mm
LTF-L: 27.75mm
LTF-R: 15.25mm
CTF-L: 22.25mm
CTF-R: 34.75mm
J-Bend Spoke/Centerlock Disc:
PCD-L: 45mm
PCD-R: 45mm
LTF-L: 27.25mm
LTF-R: 15.45mm
CTF-L: 22.75mm
CTF-R: 34.55mm
$212.49
- Elite Series road hubs
- Shimano and Campagnolo cassette body options with 6 pawl/48 point/7.5° engagement
- Straight pull and J-bend spoke options
- Sealed bearings
- Material: AL6061
- Brake Type: Rim
- OLD: 130mm
Straight Pull Spoke:
PCD-L: 32mm
PCD-R: 52.5mm
LTF-L: 27.7mm
LTF-R: 50.8mm
CTF-L: 37.45mm
CTF-R: 14.35mm
J-Bend Spoke:
PCD-L: 38.5mm
PCD-R: 50.6mm
LTF-L: 27.45mm
LTF-R: 49.05mm
CTF-L: 37.7mm
CTF-R: 16.1mm
$59.49
• Sealed cartridge bearings
• High flange design
• 120mm hub spacing
• Aluminum hub body
• Lightweight, hollow, heat-treated axle
• Fix/freewheel hub threading
• 32 and 26-hole spoke drilling
• Bolt-on 3/8-inch axle
• Black, silver, or white
$49.99
Freehub for OneUp Rear Hubs. Available in XD/XDr, Hyperglide (HG) and Microspline (MS). Includes drives side end cap. Our XD / XDr Freehub can function as an XD freehub with the 1.85mm spacer installed or as an XDr freehub by removing the spacer.
$99.99
This is the front hub we want on our bikes. Lightweight, durable, with high quality bearings and seals to give you the best combination of performance, durability and price.
This is the new benchmark for a no-nonsense front hub.
$219.99
This is the rear hub we want on our bikes. A lightweight, durable, ratchet drive hub with high quality bearings and seals to give you the best combination
of performance, durability and price.
This is the new benchmark for a no-nonsense rear hub.
$9.99 - $22.99
- Press fit designed to work the hub's non-drive side collar.
$189.99
The Clutch Hub is a traditional clutch-based coaster hub design that eliminates all of the problematic elements on ordinary hubs and only keeps the parts that work. A new, super-strong FULL 14mm axle, bearing configuration, and drag mechanism design stops the need for constant repairs. Equipped with external slack adjustment, which can be done with a 2.5mm hex key through a hub shell access hole (can be adjusted without removing the wheel), and an improved plastic hub guard spec.
Same Clutch coaster hub you’ve come to love, but with a few upgrades.
Features:
- Maximum strength axle design
- Super-durable bearing arrangement throughout
- 2.5mm hex key slack adjustment through hub shell access hole. No wheel removal required.
- Super-durable drag mechanism design
- Crankflip ready
Improvements Over the Clutch V1:
- 14mm chromoly axle bolts on both the drive and non-drive side for greater reliability
- Improved clutch engagement
- Improved manufacturing precision throughout
- More slack than the V1 hub
- All-new durable proprietary plastic spec for the removable hub guard
Specs:
- 36-hole, 2014-T6 aluminum shell
- 9T Driver
- Left or right hand drive
- 22 oz / 623g
Guard Options:
- Plastic hub guard included (but optional to use)
- Alloy hub guard also available
$69.99
The Vandero hub is back and better than ever. This new PRO version of the Vandero is a precision sealed hub with proven in-bound 3/8-inch axle bolts and two plastic guards.
Features:
- 7075-T6 aluminum hub shell
- 6903RS sealed cartridge ball bearings
- Precision bored fully concentric bearing seats for a smoother spin and prolonged bearing life
- 17mm 7075-T6 aluminum axle with steel helicoil thread inserts
- 3/8-inch heat-treated chromoly axle bolts with 17mm wrench flats and a 6mm hex slot
- Weight: 11.2oz
- Replaceable plastic hub guards included
$460.00 - $470.00
- Made start to finish in Asheville, NC
- Light weight and easy to service
$240.00
- Made start to finish in Asheville, NC
- Light weight and easy to service