Parts & Accessories
This mini sized gauge can be attached between the pump and valve to read pressures while pumping or used alone. Provides pressure readings up to 160 psi / 11 bar. Rotating gauge is easy to read and the head works with Presta, Schrader or Dunlop valves on bikes / motorcycles / car tires, forks or shocks while the Thumb Lock lever ensures an airtight seal. An air release button allows fine tuning of pressure. - Pump Head Compatibility: Presta / Schrader pumps - Tire Valve Compatibility: Presta / Schrader / Dunlop valves - Gauge: Reads 160psi / 11 bar, 1-1/2" analog - Pressure Tuning: Air release button - Material: Engineering grade polymer / aluminum - 360 degree rotatable gauge, Dust cap - Size: 6.2 x 5.8 x 3cm / 2.4" x 2.3" x 1.2" - Weight: 50g / 1.76oz
Topeak's SmartGauge D2 boasts a digital readout that goes up to 250 psi and it's compatible with Presta and Schrader valves, as well as shocks and suspension forks. The head rotates 180 degrees to get in tough spots, and an air release button helps you dial in the perfect pressure.
Upgrades any pump to a SmartHead pump head. Includes hardware, 40-inch hose, and SmartHead pump head.
Topeak Pump replacement parts and accessories. Includes all parts needed to rebuild TwinHead pumps.
- Ball-inflating needle for footballs, basketballs and more
90 Degree twist style mini CO2 head used on SWAT products - Twist design allow CO2 cartridge to be threaded into head and then unthreaded to start CO2 flow. - Flow can be controlled or stopped by threading cartridge back into head. - Includes plastic spacer that allows head to be mounted for storage on cartridge without piercing it.
Serfas has the basics covered with the Combo Kit 1. It comes with dual valve mini pump, a 6-piece mini tool, a set of tire levers, an 8-piece tire patch kit, and a medium sized saddle bag to carry it all.
Easily adapts schrader only air compressors, floor pumps, and mini pumps to work with presta valves
There’s no easier or more effective way to patch a cut tire on the road or trail than carrying and using Park Emergency Tire Boots (3 per package). These thin, extra-tough patches peel and stick to the insides of tires to repair cuts and contain the tube until you can replace the tire.
Park Tool's Pump Rebuild Kit contains one #1081 head as well as one #1087 plunger gasket for their PFP-3, PFP-6 and PFP-8 floor pumps.
Lightweight plugs for tubeless tire punctures. When paired with Genuine Innovations' Tubeless Tackle Kit (#G20439) or Tubeless Repair Kit (#G2650), you can plug pesky punctures in seconds and cycle confident for many rides to come.
One tubeless bicycle tire tool to rule them all. Compact and versatile, this is the ultimate tubeless tire repair tool. Never get stuck on the side of the trail again! Self-contained tire repair kit includes: - 5 tubeless repair plugs - 2 Presta core valves - Integrated valve core removal tool - Small, strong plugger tool - Alloy weatherproof storage capsule
Want a super-easy way to fix a flat? If you have tubeless tires on your mountain bike, all you need is Genuine Innovations' Tubeless Tire Repair Kit. No interior repair is needed, so you don't have to remove the tire. Just plug the hole with the self-vulcanizing plugs, inflate and ride away. The kit includes an insertion tool and five rope plugs.
Why have your CO2 cartridges rattling around in a seat bag when you can get Xlab's Sonic Nut Inflation Holder and store them behind your saddle? It holds two threaded CO2 cartridges and an inflator (each sold separately) in an easy-access location. The Sonic Nut is compatible with Xlab's Sonic and Turbo Wings.
Why have your CO2 cartridges rattling around in a seat bag when you can get Xlab's X-Nut Inflation Holder and store them behind your saddle? It holds two threaded CO2 cartridges and an inflator (each sold separately) in an easy-access location. The X-Nut is compatible with Xlab's Carbon and Super Wings.
- Solution for mounting pumps and C02 inflators on frames or seatpost - Soft rubber block and Velcro loops hold pumps tightly
Pssstttt. Tired of hearing that when you disconnect your shock pump? Well, hear it no more thanks to Topeak's Pressure-Rite. It's a must have for suspension fanatics as its ingenious design prevents air loss when adjusting shock and fork pressure. It's also available in a Presta version, perfect for disc wheels.
A Schrader valve adapter allows using the JoeBlow Ace floor pump for quickly pumping forks and rear shocks. Built-in air release knob allows fine tuning air pressure.
Topeak's Presta Valve Extender is the perfect solution for getting to those hard-to-reach valve stems. It's precision-machined from aluminum and is designed to fit deep-dish carbon and aluminum rims. And, it comes with an O-ring seal to ensure a leak-free fit.
Topeak's Presta Valve Extender is the perfect solution for getting to those hard-to-reach valve stems. It's precision-machined from aluminum and is designed to fit deep-dish carbon and aluminum rims that have a depth of 60 to 90mm. And, it comes with an O-ring seal to ensure a leak-free fit.
Topeak's incredibly compact CNC aluminum Threadlock Upgrade Kit threads directly to Presta or Schrader Valves with no need to change internal parts or use extra adapters. It fits most rubber pump hoses, and is compatible with Topeak JoeBlow Ace, JoeBlow Mountian, JoeBlow Sport II, JoeBlow Max II and JoeBlow Max HP.
Don't guess at your tire pressure, know with Sunlite's Duo Sport Gauge. This precision gauge reads your pressure accurately to 160 psi. The dual head works and plays well with both Presta and Schrader valves, too.
• Secures frame pump to frame • Nylon • Also good for use as a watch band
- Genuine Sunlite replacement hose - Type: Fits Sunlite Frame Pump : 5.25mm
- Genuine Sunlite replacement hose - Type: Fits Sunlite #4301 : 16 5.8mm
Replaces worn end on any pump hose. - Head Type: Schrader
• Presta and Schrader valve compatible head • Hose and head kit fits most floor pumps
$34.95 $50.00 30% Off
Replacement for Air Tool Pro Pump handle.
Will fit Specialized Sport/Comp/HP floor pumps from 2010 - present.
The FP-200 digital gauge allows you to convert your Serfas floor pump to digital, or replace a worn out digital gauge. It's compatible with all FPD-200 and FP-200's, with the exception of WFP-200 and FP-200BK.
Page 1 of 3 Next page