Goatlinks are designed to optimize the derailleur's position relative to your cassette. Offered in two versions - a 10-speed and 11-speed, each is intended to improve the shifting of your 1x drivetrain. - Optimized for using a Shimano XT 8000 or XTR 9000 Rear Derailleur with a 10-42, 10-44, 11-45, 11-46 rear cassette setup - Compatible with M8000 (XT) and M9000 (XTR) series eleven-speed Shimano rear derailleurs - Double chainrings are not currently supported - Triple chainrings are not supported - Direct Mount-native frames and SRAM derailleurs are not supported

ReMote Dropper Lever - Lever pivots on a 21mm ball bearing for smooth operation - Cable Kind Clamp does not damage secured cables and features captive hardware. - Includes barrel adjuster for on the fly changes - Engineered break-away pivot that allows the lever to break away from the pivot in the event of a crash. - 31.8mm clamp for drop bars

The Wolf Tooth ReMote is a significant lever upgrade for cable-actuated dropper seatposts. From its hassle-free installation to smooth ball bearing action to engineered failure point, the lightweight ReMote solves many of the functional problems that come with other dropper lever designs. - Includes barrel adjuster for on-the-fly changes - Lever pivots on a 21mm ball bearing for smooth operation - Engineered break-away pivot that allows the lever to break away from the mount in the event of a crash - Cable Kind Clamp does not damage secured cables and features captive hardware - Integrates with SRAM/Avid MatchMaker X clamp-equipped brake levers for better ergonomics

Wolf Tooth ReMote Light Action has a longer lever arm than the standard ReMote and is optimal for dropper posts with a harder pull or for riders that just prefer a really light actuation feel. It reduces the force to actuate a dropper by nearly a third of the standard ReMote. Based on rider feedback and tailored to work with some posts’ stiffer internal springs, the ReMote Light Action is also the choice of those with thumb injuries or reduced hand strength. - Upfront cable fixing - Large diameter ball bearing - Cable-kind clamp - Low-profile, light action - Integrated cable adjust - Breakaway axle pivot - High-traction lever - Broad compatibility

The RoadLink is a simple device that offsets the position of your Shimano road derailleur to make it possible to run a wide-range mountain bike style cassette. It is an ideal solution for riders looking to convert their road, gravel, cyclocross, or commuter. - The RoadLink is optimized for use with ten or eleven-speed 11-36t and 11-40t cassettes - 11-42 or 10-42 setups are not supported - Works with all 10-11 speed Shimano and SRAM Road Derailleurs - Best used with Single or Double Setups - see manufacturer's site for more details

The precision-engineered Wolf Tooth Seatpost Clamp secures your seatpost and looks good doing it. At the heart of the Wolf Tooth Seatpost Clamp is a custom self-aligning bolt and anchor. The M5 bolt includes spherical washer and mates with a cylindrical anchor barrel. This means that threads are always perfectly aligned, preventing binding and ensuring consistent clamping force. - M6 stainless steel bolt with integrated washer Tool interface - 4mm hex key

The Wolf Tooth Quick Release Seatpost Clamp allows for easy saddle height adjustments. An ergonomic lever on the side of the clamp opens and closes the clamp, which is held together by a bolt with a bronze bushing that lets the rider set the torque. It is friendly with carbon, steel, alloy, and titanium frames. - Bronze bushing for smooth lever action - Low-profile ergonomic lever - Stainless steel bolt with spherical washer - CNC machined 6061-T6 aluminum

You have to get that handlebar height just right. It's more comfortable, more efficient, and helps keep your entire upper body healthier. Wheels Manufacturing has your well-being covered with a wide variety of sizes to ensure your bars are right where they need to be. - Spacers are sold individually or in packs of 5 or 10 spacers. Select options from the dropdown menus to display pack size

Wheels Manufacturing Angled Spacer Single Speed Conversion Kit is a Shimano- and SRAM-compatible single speed conversion kit with ramped spacers. Additional spacers are included to dial-in chainline. Includes: - (2) - 9mm angled spacers - (6) - 3mm spacers - (2) - 1mm shims - (1) - lockring - (1) - 16t cog Compatible with: - Any 1/2 x 1/8 pitch chain, this includes BMX and Track chains - Any 8 or 9-speed chain * Does not work acceptably with 10 or 11-speed chains

Grade 300 retainer bearings for headset and bottom bracket service. - 10 Retainers/Bag

All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt

All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M4x8 Flat Head Screws Note: The mounting holes on Wheels Mfg DROPOUT-120 are 18mm apart, center-to-center. Do not confuse this hanger with DROPOUT-138.

All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M3x10 Socket Head Cap Screws

All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M5x10 Flat Head Screws

All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (3) M3x8 Flat Head Screws - Specialized Part #9890-4226 Note: This hanger has been updated to match Specialized Part #9890-4226 and will accommodate 28-tooth and larger cassette cogs. Shifting with smaller cassette cog ranges will not be adversely affected.

All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M4x4 Socket Head Screws

All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - For carbon frames, use (2) M3x8 Flat head screws - For all non-carbon frames, use (2) M3x10 Flat head screws

All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M5x10 Socket Head Screw

All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M3x8 Flat Head Screws

All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt

All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M4x8 Flat Head Screws

All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - (2) M4x8 Flat head screws included Note: This dropout can be used in place of Wheels Mfg DROPOUT-246. The only difference is the number of fasteners.

All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - (2) M4x8 Flat head screws included

All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt

All Wheels Mfg. replacement derailleur hangers are produced in Colorado to exacting tolerances. - Replaces Ibis Part #HANG-142 - Re-use your existing bolt (fastener not included) - CNC machined 6061 aluminum - Black anodized finish

All Wheels Mfg. replacement derailleur hangers are produced in Colorado to exacting tolerances. - Replaces Specialized Part #S172600001 - Includes both sides of the derailleur hanger - Attaches to frame with (1) M3x6 socket head screw (sold separately) - CNC machined 6061 aluminum - Black anodized finish

All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt

All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt

All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt, (1) M4x8 Flat Head Screw

All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt