Flat

Trek's lightest MTB handlebar offers an oversized 35mm clamp diameter that adds strength and saves weight. - Oversized 35mm clamp diameter offers increased strength and minimal weight - OCLV Carbon construction is the benchmark for durability and light weight - Shifter and brake lever position lines for spot-on control setup - 4 degree upsweep and 9 degree backsweep optimal for XC and trail - Trim Lines allow personalized fit

Whisky's No.9 Flat Bar keeps your weight lower and more forward on the bike for a more aggressive riding position. It’s wide, sleek, and tested to the highest standards to deliver hours of reliable trail riding. Trimmable ends allow you to really dial in your fit to keep you comfortable every time your tires hit the dirt or snow.

Atmos is our new premium offering for cross-country performance. The Atmos 7k flat bar is an updated, more modern cross-country bar with a 760mm width and a 9° backsweep. The bar can be trimmed by up to 30mm per side allowing you to customize the bar to your preferred width. This bar is made of lightweight 7050 aluminum. - 760mm width - 250g at full width - 7050 aluminum - Wide to start and trimmable by 30mm each side SPECIFICATIONS - Type: Flat - Application: XC - Clamp Diameter: 31.8mm - Backsweep (degrees): 9

Atmos is our new premium offering for cross-country performance. The Atmos carbon flat bar is an updated, more modern cross-country bar with a 760mm width and a 9° backsweep. The bar can be trimmed by up to 40mm per side allowing you to customize the bar to your preferred width. This is the lightest bar in the Atmos range. - Wide to start and trimmable by 40mm each side - Specialty tuned carbon laminate to absorb noise while maintaining stiffness - 190g at full width SPECIFICATIONS - Type: Flat - Application: XC - Clamp Diameter: 31.8mm - Width: 760mm - Backsweep (degrees): 9

Uncompromising control and unflinching style. Based on the width of Enduro superstar Jerome Clementz, the Descendant carbon flat bars bring comfort and control to riders seeking the aggressive position a flat bar offers. Descendant series bars are the new benchmark for control and comfort. - Material: Carbon fiber - Width: 750mm - Backsweep: 7-degrees - Bar Clamp Diameter: 31.8mm - Colors: Black

The Cheater Bar is built from triple butted 4130 CroMoly steel and is tough enough to handle all of the abuse you will inflict upon it on the trail. Surly made two versions: a clear coated raw steel version and a black ED coated version. Both are CroMoly steel. - Material: Cromoly steel - Clamp diameter: 31.8mm - Width: 780mm - Rise: 0mm - Sweep Angle: 11 degrees - Color: Clear Coat Silver and E.D. coated Black - Weight: 400g

• Lightweight aluminum construction • Back sweep: 6 degrees

• Sturdy, chrome-plated steel construction • Back sweep: 6 degrees

For XC racing, stiffness equals speed. That’s what drove our thinking when building the Roval Control SL handlebar. Borrowing inspiration from trail bike tech, we knew a 35mm bar clamp width would give us the rigidity our athletes demanded, and function as the backbone for our ultra-light, hand laid up carbon. It’s light… Like, 185 grams light. But, light-weight and stiffness aren’t the only pieces of the puzzle. Riders also need high-precision control while descending, and a comfortable, sustainable position on grueling climbs. The Roval Control SL’s 780mm width allows you to dial in your perfect size, and it’s World Championship proven geometry gives the confidence to attack any segment. - Material: High modulus carbon fiber - Width: 780mm, includes cut marks to customize width - Rise: 0mm or 20mm - Upsweep: 6 degrees - Backsweep: 8 degrees - Clamp Diameter: 35mm - Weight: 185g

A unique build requires a unique cockpit. The Classic 10D Flat bar is a refined version of its high-performance predecessors, featuring a classy high-polish silver finish and 10-degrees of sweep without changing reach. - Material: double-butted 6061 alloy - Width: 660mm/780mm - Backsweep: 10° - Rise: flat - Clamp diameter: 31.8mm - Bar-end compatible: yes - Weight: 349g

The standard for which Ritchey performance is based on. Race-worthy components priced for the casual cyclist. - Double butted 6061 alloy construction - Gentle sweep for ergonomic performance - Bar Clamp Diameter: 31.8mm - Rise: 5mm - Weight: 276g

The only choice for World Champions and Olympians when it comes to wanting the best bar for XC. Ritchey SuperLogic 2x Flat bar offers crucial fit options in one bar when the high level of competition demands it. Using SuperLogic construction and advanced design philosophy, this 2x bar is perfect for those looking to dial in their race rig without sacrificing weight. - Material: lightweight carbon fiber - Width: 680 and 710mm (cutting not recommended) - Rise: reversible +/- 5mm flat rise - Backsweep: 9° - Clamp diameter: 31.8mm - Bar-end compatible: no - Weight: 120g

Crucial for dialing-in fit, Ritchey 2x bars help get your hands in just the right position for the best ride performance on your mountain bike. - Material: double-butted 6061 alloy - Width: 740mm - Backsweep: 9° - Rise: reversible +/- 5mm flat rise - Clamp diameter: 31.8mm - Bar-end compatible: yes - Weight: 276g

The WCS Carbon Logic-E Flat bar ties together Ritchey's historic mountain biking heritage with the demands of today's modern electronic drivetrains. Designed to accommodate the internal routing of Shimano EW-SD50 wires for either Shimano Di2 or STEPS systems, this bar is built to be light and compliant for incredible durability and a supple, refined ride. The WCS Carbon Logic-E Flat bar is the choice for XC riders looking for a high-end carbon eMTB bar that's built for performance. The WCS Carbon Logic-E Flat bar features Ritchey's proven WCS carbon technology in a flat mountain bike bar with internal reinforcement and a textured stem clamp area to reduce the risk of bar slippage. - Material: carbon fiber - Width: 740mm (cutting not recommended) - Rise: 5mm - Backsweep: 9° - Upsweep: 1.5° - Clamp diameter: 31.8mm - Bar-end compatible: no - Weight: 163g - Electronic compatibility: Shimano Di2 / STEPS (Shimano EW-SD50 cable—internal routing) - For proper assembly, stems with open faceplates such as the Ritchey C220, Trail is required.

The WCS Carbon Trail Flat +/-5mm Handlebar is two bars in one: select 5mm of rise or drop while maintaining a 9-degree sweep. Great for 29er's and other bikes with tall front ends. - +/- 5mm rise - Matte UD carbon finish - Width: 740mm - Sweep: 9 degrees - 180g

The 2X bar packs the material technology, strength, and weight you expect from a Ritchey bar with an additional +/-5mm of height adjustment. - Material: triple-butted 7050 alloy - Width: 740mm (with cutting marks*) - Rise: reversible +/- 5mm flat rise - Backsweep: 5° and 9° - Clamp diameter: 31.8mm - Bar-end compatible: yes - Weight: 232g - Cutting must be done by a professional mechanic or Ritchey authorized dealer, though cutting or modifying any Ritchey product will void the warranty.

The 2X bar packs the material technology, strength, and weight you expect from a Ritchey bar with an additional +/-5mm of height adjustment. - Material: triple-butted 7050 alloy - Width: 740mm (with cutting marks*) - Rise: reversible +/- 5mm flat rise - Backsweep: 5° and 9° - Clamp diameter: 31.8mm - Bar-end compatible: yes - Weight: 232g

The WCS Trail Flat +/- 5 Handlebar is two bars in one: select 5mm of rise or drop while maintaining a 9-degree sweep. Great for 29er's and other bikes with tall front ends. - +/- 5mm rise - Width: 720mm - Sweep: 9 degrees - 232g

The new 2X Trail bar is two bars in one: select 5mm of rise or drop while maintaining a 9-degree sweep. Great for 29ers and other bikes with tall front ends. - Material: triple-butted 7050 alloy - Width: 720 and 760mm - Rise: reversible +/- 5mm flat rise - Backsweep: 9° - Clamp diameter: 31.8mm - Bar-end compatible: yes - Weight: 232g

Race Face Atlas riser handlebar with an anodized, shot-peened finish. - Anodized, shot-peened finish - Cold-drawn and butted proprietary AirAlloy aluminum tubing - 4 degree upsweep

- Race Face engineering at a value price point - Cold drawn shot peened 6061 aluminum

Origin-8's Bat Wing Handlebar delivers futuristic looks and a wrist-friendly 25-degree sweep. It's crafted from lightweight aluminum and features a hydroformed center section with plenty of room to mount accessories.

- Full UD carbon construction - 31.8mm clamp diameter - 9-degree back sweep - EN-Mountain safety certification - 200g - Width: 760mm/780mm - Rise: 0mm/7mm - Upsweep / Drop: 4-degree - Back Sweep / Bend: 9-degree

Explore some trail with Origin-8's Pro Pulsion Pro Sweep 6 Handlebar. This 640mm-wide bar is crafted from lightweight aluminum and features a comfortable 6-degree sweep.

Origin-8's aluminum Stash Bar II handlebar will be right at home on your fixie or urban steed. It's completely straight and super narrow so you can dart around obstacles with ease. The cool spherical aluminum end caps are removable if you prefer a more muted look.

- Alternative flat bar design - Offers multiple hand positions for improved handling, power output, and ergonomic comfort - 6061-T6 Tubular alloy construction - 120mm of additional reach with hands on the front bar in an aero position - Great for touring and multiple off-road use applications - Lots of bar space for accessories - ISO-Mountain safety certified - Clamp Diameter: 31.8mm - Width : 760mm - Rise / Reach: 120mm - Upsweep / Drop: 0° - Sweep: 15° - Color: Black - Finish: Matte

- Alternative flat bar design - Ergonomic 15º backsweep for improved handling, power output, and comfort - Wide 110mm clamp area for mounting accessories - ISO-Mountain safety certified - Material: AL6061

- Rigid aluminum bar - Great for Urban riders or others wanting a more upright position than drops allow

The M5 bar is designed with an offset grip position and 31.8mm clamping surface, the bar can be mounted with a positive or negative rise of 5mm. This versatile bar combines a familiar 9degree sweep with the greater width and strength that's demanded by today's more aggressive XC riders. - Includes decal sheet to color match with ENVE wheel decals

For cross country and all-mountain riding, Dimension Mountain bars provide generous—but not ridiculous—width, rigorously tested to ISO 4210 Mountain standards. - Shot-peened finish - 6061-T6 Aluminum - 9-deg backsweep - 720mm wide - Zero-Rise