Filter By:
- Rigid (129)
- Suspension (133)
- Show More Brands
- Show Fewer Brands
- Show More Model Years
- Show Fewer Model Years
Forks
$7.50
$10.00
25% Off
Keep the weight down and your headset snug with the Specialzied Carbon Steerer Tube Plug.
$9.99
- Protective neoprene and velcro cut-To-Fit boot fits most rear shocks
$15.90
- Clamps on to dual-Crown fork stanchions to prevent damage to frame
- Easy to install and adjust, More secure and lower profile than stock bumpers
- Molded loops allow clean and easy zip-Tie number plate mounting
- Available for 35mm boxxer or 40mm fox stanchions, Sold in pairs
$17.00 - $43.00
Service kits include dust seals, foam rings, oil seals, air and damper o-rings needed for basic service.
$27.00 - $29.00
Service your suspension fork with Enduro Seal KIts.
- Custom made for each make and model of fork
$48.29 - $52.49
• Caliper brake mounts
• 35mm rake
• High-tensile steel construction
• 1-inch steerer diameter
• 185mm steerer length
• Threaded fork
• Compatible with 20-inch wheels
$52.49
- Hi-tensile steel construction
- Caliper brake mount
- 35mm rake
- Axle-to-Crown: 365mm
- Race Diameter: 27mm
- Axle: 3/8-inch
- Thread Length: 120mm
- Steerer Length: 200mm
- Steerer Size: 1-inch
$52.49
- Hi-tensile steel construction
- Caliper brake mount
- 35mm rake
- Steerer Type: Threaded
- Steerer Size: 1-inch
- Steerer Length: 200mm
- Brake Mount: Caliper
- Axle-to-Crown: 395mm
- Race Diameter: 27mm
- Axle: 3/8-inch
- Thread Length: 100mm
$52.49 - $62.99
Economically priced hi-tensile steel MTB fork for 26-inch wheels.
- Steerer Type: Threaded Steerer
- Size: 1" (7/8 ID)
- Steerer Length: 198mm
- Rake: 45mm
- Axle-to-Crown: 393mm
- Race Diameter: 27mm
- Axle: 3/8"
- Thread Length: 95mm
$52.49
- Hi-tensile steel construction
- Caliper brake mount
- 35mm rake
- Steerer Type: Threaded
- Steerer Size: 1-inch
- Steerer Length: 137mm
- Brake Mount: Caliper
- Rake: 35mm
- Axle-to-Crown: 315mm
- Race Diameter: 27mm
- Axle: 3/8-inch
- Thread Length: 40mm
$62.99
- Hi-tensile steel construction
- Available with brake studs or without
- 60mm rake
- Type: Cruiser Size: 26"
- Steerer Type: Threaded Steerer
- Steerer Length: 250mm
- Axle-to-Crown: 400mm
- Axle: 3/8"
- Thread Length: 125mm
- O.L.D.: 100mm
$62.99
- Brake mounts: Caliper
- Construction: Hi-tensile steel
- Rake: 50mm
- Type: LW
- Steerer type: Threaded
- Race diameter: 27mm
- Axle: 3/8'inch
$62.99
• Cantilever brake mounts
• High-tensile steel construction
• Threaded fork
• Steerer diameter: 1-inch
• Steerer length: 180mm
$62.99
• Cantilever brake mounts
• High-tensile steel construction
• Threaded fork
• Steerer diameter: 1-inch
• Steerer length: 200mm
$62.99 - $69.29
• Cantilever brake mounts
• High-tensile steel construction
• Threaded fork
• Steerer diameter: 1-inch
• Steerer length: 200mm
• For bikes with 26-inch wheels
$69.29
- Cantilever brake mounts
- High-tensile steel construction
- Threadless fork
- Steerer diameter: 1 1/8-inch
- Steerer length: 260mm
- For bikes with 26-inch wheels
$73.49 - $83.99
- Cantilever brake mounts
- 45mm rake
- Hi-tensile steel construction
- Steerer Type: Threaded
- Steerer Size: 1-inch
- Brake Mount: Cantilever
- Rake: 45mm
- Axle-to-Crown: 405mm
- Thread Length: 120mm
- Axle: QR 9mm
$73.49 - $83.99
• Cantilever brake mounts
• 45mm rake
• High-tensile steel construction
• Threaded fork
$85.00
Dimension Rigid Mountain Forks are intended for general recreational riding only; they are not intended for aggressive riding, stunt riding or road racing.
- Forged dropouts with eyelets
- Chromoly tubing
- Cantilever mounts only (no disc mount)
- Axle to Crown Length: 395mm
- Brake Mount (Fork): Canti Studs
- Color: Black
- Crown Race: 30
- Front Axle: 10mm x 100mm
- Maximum Tire Clearance (Fork): 3.8
- Offset: 45mm
- S.H.I.S. Stem Clamp Diameter: 25.4-24 tpi Quill
- Steerer Tube Length (mm): 140
- Steerer Type: Straight
- Weight: 877g
- Wheel Size: 26-inch
$86.95
Ideal if you are looking for a rigid 26" dirt jump fork that won't break the bank
- CrMo steerer with oversized 31.8mm diameter plain gauge CrMo legs
- 51mm International Standard disc brake mounts
- 9.5mm (standard QR) safety dropouts
- 1-1/8" 2-piece welded steerer/crown
$89.99
- Forged dropouts with eyelets, straight-gauge oval tapered blades
- Dimension Forks are intended for general recreational riding only; they are not intended for aggressive riding, stunt riding or road racing
- 85mm threaded section
- Fits up to 30c tires
- Axle to Crown Length: 382 mm
- Brake Mount (Fork): Long Reach Caliper (55mm - 73mm)
- Crown Race: 27
- Front Axle: 9mm x 100mm
- Material: Steel
- Offset: 50mm
- S.H.I.S. Stem Clamp Diameter: 25.4-24tpi Quill
- Steerer Type: Straight
- Weight: 839g, 876g, 907g
- Wheel Size: 27"
$89.99
Get back on the road with a genuine replacement fork for Electra Townie Commute bikes.
Color matched for direct compatibility.
$89.99
Get back on the road with a genuine replacement fork for Electra Townie Go! 8D bikes.
Color matched for direct compatibility.
$94.49 - $109.19
• Chromoly construction
• V-brake mounts
• Fits bikes with 16-inch wheels
• Steerer length: 250mm
$94.49
• Caliper brake mounts
• 385mm axle-to-crown
• Chromoly construction
• 1-inch steerer diameter
• Threaded fork
$99.99
• Cantilever brake mounts
• 45mm rake
• Chromoly construction
• 1 1/8-inch steerer diameter
• Threadless fork
$101.99
From the pavement to the gravel, Origin-8's Cromo-Lite Disc Road Fork is made to explore. Crafted from super tough 4130 cromoly, it provides a comfortable ride with room for 28c tires for added control. And, it features mounts for disc or caliper brakes so you can ride your way.
Page 1 of 9
Next page